Blue Sea E-Series Dual Circuit Battery Switch A high quality battery switch for craft with a dual battery installation. This switch has the ability to switch two isolated batteries to two isolated loads i.e. Starting battery to starter motor and house battery to domestic circuits. When the switch is set to the Combine position, both batteries are connected in parallel to the loads. Make before break...

Vetus Heavy Duty Battery Changeover Switch The famous VETUS battery selector switch is a sturdy rotary series switch. It enables battery usage and charging. From the OFF position, in accordance with the switch pattern, battery 1 only, battery 1 plus battery 2 or battery 2 only can be switched on. The switch enables usage and charging of the batteries individually and in parallel connection. The...

Battery Isolation Switch Intended for isolating a single battery. Can also be used for controling high current devices such as winches, windlasses, capstans etc. Maximum Voltage: 24 Vdc Maximum Surge Current: 500Amps for 10 seconds @ 12Vdc Maximum continuous current: 100Amps/140Amps @ 12Vdc Dimensions: 75mm x 60mm diameter Terminal Stud Diameter: 10mm

This switch offers a number of unique features, the highlight being the patented Contour Locking System, allowing it to be a stand alone unit, or locked together with other switches. The control knob can be removed by switching to an counterclockwise 45 degree position. This control knob also features an interchangeable labeling system allowing a full range of applications (Item # 713 or 715). Three...

BLUE SEA M-SERIES 4 POSITION BATTERY SWITCH 300 Ampere continuous rating for outboards and small gasoline or diesel engines. Tin-plated copper studs for maximum conductivity and corrosion resistance Studs accept 3⁄8" (M10) ring terminals One-piece terminal stud design never loosens over time 7⁄8" (22.22mm) stud length accepts multiple cable terminals Isolating cover with three snap-in side...

Blue Sea E-SERIES BATTERY SWITCHES 350 Ampere continuous rating for inboard petrol and diesel engines. Tin-plated copper studs for maximum conductivity and corrosion resistance Studs accept 3⁄8" (M10) ring terminals 7⁄8" (22mm) stud length accepts multiple cable terminals One-piece terminal stud design never loosens over time Case design allows surface or rear panel mounting options Label...

Battery Terminal with M8 stud post and wing nut. Sold in pairs (ie. 1 x +'ve, 1 x -'ve)

Blue Sea E-Series 4 Position Battery Switch Select either battery bank or both plus an off position, 350 Ampere continuous rating for inboard petrol and diesel engines. Tin-plated copper studs for maximum conductivity and corrosion resistance Studs accept 3⁄8" (M10) ring terminals 7⁄8" (22mm) stud length accepts multiple cable terminals One-piece terminal stud design never loosens over...

The 716-H-140A-DVSR is an ideal replacement for a battery selector switch. Just remove the selector switch and connect the existing wires to a 716 cluster, no extra wires are required for a fully automatic battery management system. To be used in a single outboard dual battery bank system or in a single alternator inboard engine dual battery bank system. No more flat start batteries Electronics...

Toggle Switch On/Off panel mount toggle switch with waterproof cover. Mounting aperture 12mm 12v 15a Spade Terminal Connections

The MD range of battery switches allow you to install the battery switch very close to the battery, to remotely manage the increased electrical loads found on today's boats. This reduces cable lengths and sizes, providing significant savings in expense and weight of copper battery cable. They are ideal for remote isolation of bow and stern thrusters. Remote operation Battery switch can...

Battery Terminal screw fixing for cable up to 40mm². Sold in pairs (ie. 1 x +ve, 1 x -ve)

YBX Active Marine batteries are ideal for yachts, motor boats, sailing boats and other water craft. Specifically designed to handle the rigours of wave pounding and trailer transport, they deliver reliable starting and auxiliary power and auxiliary power for on board systems. They incorporate advanced design features and specialist hard-wearing components for all marine applications.+   Features Specially developed to meet the demands of both starting and auxiliary power requirements Next generation EFB technology provides greater endurance, more available cycles & faster charging Vibrolock construction provides enhanced vibration resistance Dual terminal Supplied charged and ready to fit Enhanced safety features including integrated flame arrestor & carry handle Fully maintenance free Leak proof double lid 960 watt hours  

35mm/sq, tinned battery cable designed to withstand the harsh marine environment, available in a range of other sizes and for most applications. Sold per mtr Technical Specifications Tinned copper conductors provide excellent resistance to corrosion Good resistance to petrol, diesel, lubricating oils and diluted acid Hard grade PVC insulation offers good resistance to abrasion and cut though Suitable...

Blue Sea M-Series Battery Switches 300 Ampere continuous rating for outboards and small gasoline or diesel engines. Tin-plated copper studs for maximum conductivity and corrosion resistance Studs accept 3⁄8" (M10) ring terminals One-piece terminal stud design never loosens over time 7⁄8" (22.22mm) stud length accepts multiple cable terminals Isolating cover with three snap-in side pieces...

Rule Model 35A Float Switch Dimensions: 105mm long, 40mm wide, 110mm high (at max. lift) Maximum Current: 14 amp For automatic on/off bilge pump control. Switch design prevents rapid on/off cycling.

Thermo Plastic Toggle Switch 12v DC - Without Illumination 2 Position (on-off) dash mount toggle switch 15A 12v - 10A 24v

Three-position switch (off,1,2) for one wiper motor. Type HDMSW, for two-speed wiper motors. Suitable for wiper motors RWS, DIN and HDMC. Not suitable for model ORW. Max. switching current: 20A Max. Panel thickness:7 mm

Plastic Battery Box • External dimensions (LxWxH): 340x230x250mm • Internal dimensions / Maximum battery size (LxWxH) = 280x195x230mm • Designed for batteries up to 280mm long (of group sizes 24, 25, 34, 35, among others) • Mounting equipment: Includes durable hold-down fastening strap and foot clamps that secure the strap onto the supporting surface (screws not included) •...

Key universal lanyard, Features internal core, meets RYA specification, Coiled lanyard Fits: Johnson, Evinrude, Mercury, Yamaha, Hidea, Suzuki & Honda

Mastervolt EasyCharge 6/12v 4.3amp For people on the move, the EasyCharge portable battery charger offers a rugged solution that can be used on the boat, car, motorcycle, and camper van. With a rugged, ergonomic construction, and waterproof to IP65 standard, the portable chargers have an intuitive control panel. Rugged durable weather resistant housing to IP65 standard Charges & maintains...

Large battery box designed with adjustable partition to suit different battery case sizes. Suppled with fitting strap, this is ensential to prevent spillages leaking in to the boat. Size: L410 x W200 x H250mm

Alarm Switch Panel Only

6 Switch Horizontal Panel Stamped anodized aluminum panel with 6 illuminated switches and spare labels Panel rating: 12 volts, 37 amps total. Individual circuit 10 amps Dimension A: 115mmDimension B: 165mmDimension C: 89mmDimension D: 140mm